@pookieeprints

© 2026 Pookie Prints

Upload & Quote

Your Model,
Quoted in Seconds.

Upload an STL file, view it in 3D, customize material and settings — get your instant quote and add to cart. No account needed.

.STL

Drag & drop your STL file here

or click to browse

Maximum dimensions: 250 × 250 × 250 mm • Max file size: 100MB

Print Options

PLA is easy to print and suitable for most applications. PETG offers better strength and heat resistance.

10% 25% 50% 75% 100%

Higher infill = stronger but heavier print. 20% is good for most models.

What these settings do:

Both cost ₹4/g. PLA comes in five colours and suits indoor decor, toys and prototypes, but softens near 55 °C; PETG is Black or White only, tougher and heat-tolerant to about 75 °C — the pick for outdoor, wet or mechanical parts.
20% is right for most prints. More infill means a stronger, heavier part and a higher price; less means lighter and cheaper.
0.2 mm is the default and the right choice for most models. 0.1 mm gives fine detail but is slower and dearer; 0.3 mm is draft quality — fastest and cheapest.
STL files up to 100 MB, and up to 250 × 250 × 250 mm. Your file is sliced with the real print profile, so the weight and time in the quote are measured rather than guessed.

3D Preview

Upload your STL file and we turn it into a physical 3D print

No Model Loaded

Upload an STL file to see 3D preview here

Pricing Breakdown

Material Cost ₹-
Printing Cost ₹-
Subtotal ₹-

Shipping and taxes will be calculated at checkout

Delhivery Tracked
Razorpay Secure
Material (weight in grams × ₹4) + printing (minutes × ₹1.50). Shipping, 18% GST and any ₹50 service fee are added at checkout, and the checkout total is always the authoritative figure.
You are paying for weight and print time, so lower infill, 0.3 mm layers or a smaller scale all bring the price down. Switching material will not — PLA and PETG are both ₹4/g.